The bearings are wrapped of a cold formable homogenous bronze (CuSn8), which will obtain exceptional material properties. The standard size are fitted with diamond shaped lubrication indents on the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film in the start movement and therewith reduce the start friction.
TECHNICAL DATE
Max. Load
Static
120N/mm2
Hardness
HB 110-150
Dynamic
40N/mm2
Elongation
40%
Max. Speed
2m/s
Temp.
-100¡æ~£«200¡æ
Max. PV
2.8N/mm2.m/s
Friction coefficient
0.08~0.25
Tensile strength
450N/mm2
Thermal conductivity
60W(m.K)-1
Yield point
450N/mm2
Coefficient of thermal expansion
15x10-6K
APPLICATION CHARACTER
1. The products inside surface is full of diamond oil indention, which can stock grease.
2. Minim oil lubrication, can be applied in water-lubrication environment
3. Good anti-abrasion, low coefficient of friction, long operating life.
4. Can work consecutively at 100¡æ~+200¡æ.
5. Good mending, low-noise, non-pollution
6. This wall, light, can reducing the volume of the machine
7. High density, high load no alveoli
The products now are applied in different machine, such as auto machines, pumps, plastic injection machine, auto industry, heavy equipments, etc.
